Unidrive M300 parameter change via profinet

paulcamborne

Member
P
Join Date
Jun 2007
Location
ellesmere port
Posts
11
Hi
I have a 1511 plc and unidrive M300s communicating over profinet. I can start and stop and change speed ok but I cant workout how to change ramp parameters for example from a watch table.
I am using the SI profinet V2 on the drive for the comms.

Any ideas welcome
 

Similar Topics

panic mode
PanelBuilderPro connection to PLC in Unidrive M700
hello everyone, trying to find a way to read/write memory of the PLC that is inside Unidrive M700 over Ethernet (modbus TCP) using device/server...
Replies
0
Views
557
panic mode
panic mode
busarider29
Download parameters to Unidrive
Greetings experts, We have a 'Control Techniques' Unidrive 3405 in an older machine. It appears that the drive parameters are recorded in a .CTD...
Replies
0
Views
719
busarider29
busarider29
J
Unidrive SP
Hi We intend to replace our LENZE EVS9326 EP with a Control Technique Unidrive SP. The machine is a simple one; PLC send ABZ pulses to the drive...
Replies
3
Views
2,027
Ryan_Ge
R
R
Control techniques Unidrive M700 Modbus address list
Looking for a Modbus address manual for M700. Modbus address is same as the Parameter number for 16Int parameters. But it is different for 32Int...
Replies
2
Views
1,978
Ranjith
R
M
Kinco MT4414TE with unidrive modbus rtu slave
Hello, new here, so let's start :) I am having some issues with kinco mt series hmi, mt4414te. Kinco and unidrive sp are connected via modbus...
Replies
14
Views
3,868
Marinbnm
M
Back
Top Bottom