Hello!
I'm working in upgrading an old c28k Omron to a cp1e.
My doubts are concerning the IO pins. I can see in syswin 3.4 the following inputs:
0.0 to 0.15 so I should convert it to 0.0 to 1.4. Correct?
Regarding the outputs, on the PLC they are marked 100, 101, 102 and so on, but on the program I can only see coils starting at 1.0, 1.1, 1.2. Should I assume that they are the outputs and convert them to 100.0, 100.1, and so on.
Thanks
Bruno
I'm working in upgrading an old c28k Omron to a cp1e.
My doubts are concerning the IO pins. I can see in syswin 3.4 the following inputs:
0.0 to 0.15 so I should convert it to 0.0 to 1.4. Correct?
Regarding the outputs, on the PLC they are marked 100, 101, 102 and so on, but on the program I can only see coils starting at 1.0, 1.1, 1.2. Should I assume that they are the outputs and convert them to 100.0, 100.1, and so on.
Thanks
Bruno