Hi!
I'm working with a project consisting of:
Simatic Step 7
CPU315-2 DP (6ES315-2AG10-0AB0)
CU310-2 DP (6SL3040-1LA00-0AA0)
PM240-2 (6SL3210-1PE22-7AL0)
SMC20 (6SL3055-0AA00-5BA3)
Motor (1FT6084-1AF71-1EG1)
I have successfully programmed my CPU to run the Servo via ProfiBus with the block FB283 and a VAT-Table.
In an earlier project I've used a S7-1200 (TIA-Portal) to run a S120-Drive via ProfiNet and the block FB284 (SINA_POS), which was very easy to use.
Is there anybody out there knowing if the FB284 (SINA_POS) exists or if anybody have made one for Step 7?
Best Regards
Christoffer
I'm working with a project consisting of:
Simatic Step 7
CPU315-2 DP (6ES315-2AG10-0AB0)
CU310-2 DP (6SL3040-1LA00-0AA0)
PM240-2 (6SL3210-1PE22-7AL0)
SMC20 (6SL3055-0AA00-5BA3)
Motor (1FT6084-1AF71-1EG1)
I have successfully programmed my CPU to run the Servo via ProfiBus with the block FB283 and a VAT-Table.
In an earlier project I've used a S7-1200 (TIA-Portal) to run a S120-Drive via ProfiNet and the block FB284 (SINA_POS), which was very easy to use.
Is there anybody out there knowing if the FB284 (SINA_POS) exists or if anybody have made one for Step 7?
Best Regards
Christoffer