lot of books no basics

John Grizia

Member
Join Date
Jun 2002
Location
leeming Western australia
Posts
4
Just got a new rxlogix kit suprise suprise, no information about
basic programming instructions samples at all.
unlike the good chaps of mitsubhishi automation.is there is any place where i can get started with the basic instructions.
cheers John.
 
John,

All the manuals are available online. Have you tried http://www.ab.com yet. Right on the home page is a link to Manuals Online.

Here is a link to the Control Procesors section:

http://www.ab.com/manuals/cp/

You didn't mention which PLC you are using RSLogix for so you will have to take it from there as I cannot give you an idiot-proof link. Ah, what the heck, here are the idiot-proof links:

MicroLogix 1000 Instruction Set Reference Manual:

http://www.ab.com/manuals/cp/1747-rm001c-en-p.pdf

MicroLogix 1200/1500 Instruction Set Reference Manual:

http://www.ab.com/manuals/cp/1762-rm001c-en-p.pdf

SLC 500 Fixed and Modular Controllers Instruction Set Reference Manual:

http://www.ab.com/manuals/cp/1747-rm001c-en-p.pdf

PLC-5 Instruction Set Reference Manual:
http://www.ab.com/manuals/cp/178561.pdf

Ok, I am tired of entering these. If you want PLC-2, PLC-3, or ControlLogix links you are just going to have to find them yourself. The point is, they are online in PDF format. Get them, download them, print them.

OG

oh, two other things....

#1 there is a sample program that installs with your software.
#2 in the software click Help => Instruction Help
 

Similar Topics

Hey Guys, I am getting random rack/slot errors. I go to download and everything is ok but then it has a error. For example - Yesterday everything...
Replies
1
Views
346
Hi All What I understood from various manuals (e.g. rm094 & um543) is that you have the freedom to allocate any module to any slot. I understand...
Replies
5
Views
636
Hello, I want to plot a line on X,Y axis with defined start and end points on Quick Panel+. I use PAC Machine Edition 9.7, and it supports...
Replies
14
Views
1,706
Hello, I want to plot a line on X,Y axis with defined start and end points on Quick Panel+. I use PAC Machine Edition 9.7, and it supports...
Replies
0
Views
332
Error 8097: Controller Error - CPU slot mismatch [0x05][0x46] [0xC00C0001] I got that error above when I was trying to download my programming to...
Replies
2
Views
389
Back
Top Bottom