GX Works 2

HersheysMM

Member
Join Date
Feb 2017
Location
IL
Posts
28
Does anyone know if there is anyway to search in GX Works for a value in example when connected with the PLC and I am monitoring all windows and D232 has the actual below it of 686. Is there anyway to search for 686? I think this would be faster when I have a hundreds of M or D values and on my HMI I can see what my setting is. see attached pic


Capture.jpg
 
I don't have program open now, but there should be a list you can fill with variables. That can also be used to upload and download data during service visits. Check the other menus.
 

Similar Topics

Hey everyone and anyone that can lend a helping hand. I have a project that I am being asked to add some animations of Solidworks or "3D" models...
Replies
8
Views
137
PLC: Fx5u CPU As Per manual High Speed Input Module can add from Navigation window  [Parameter]  [Module Information]  Right-click  [Add New...
Replies
1
Views
73
Hi all, anyone does have experience in Gx Works 2? Currently I having an issue which is when certain device added from MELSOFT Navigator and...
Replies
1
Views
92
Hi Guys, I want to connect my 1769-L36ERM to a different network domain, is it possible to do it using only the dual ports in the Controller? Or...
Replies
3
Views
178
I'm totally new to PLC's and I've just purchased an FX3U-14MR Mitsubishi Clone. I believe I need to use GX Works Software to program it but I've...
Replies
1
Views
91
Back
Top Bottom