hi guys
can any one help me with correct procedure to connect RSlogix5k to logix5561 plc step by step.
i am using ENET ethernet module.
1.
can anyone tell me how to configure RSlinx to end step?
2.
the ENET module connected with 8 port switch with couple of slots empty. do i need to connect ethernet cable straight to ENET module or plug it to spider switch?
3.
if ENET module ip is e.g.192.168.250.100 and subnet 255.255.254.0 do i need to change ip in my laptop aswell?
4.
i have copy of backup file which need to be alter and download again in plc. there is project path in file AB_ETHIP-1\192.168.250.100\Backplane\0. is there any thing to do with this?
please guys help me with this, this is the first time i am upload/download the program and in big trouble..
i will be very thankfull if any one help me with this.....
can any one help me with correct procedure to connect RSlogix5k to logix5561 plc step by step.
i am using ENET ethernet module.
1.
can anyone tell me how to configure RSlinx to end step?
2.
the ENET module connected with 8 port switch with couple of slots empty. do i need to connect ethernet cable straight to ENET module or plug it to spider switch?
3.
if ENET module ip is e.g.192.168.250.100 and subnet 255.255.254.0 do i need to change ip in my laptop aswell?
4.
i have copy of backup file which need to be alter and download again in plc. there is project path in file AB_ETHIP-1\192.168.250.100\Backplane\0. is there any thing to do with this?
please guys help me with this, this is the first time i am upload/download the program and in big trouble..
i will be very thankfull if any one help me with this.....