maintenance@seta
Member
hi there can anyone help.
When using a mitsubishi PLC you can specifiy bits ie
k1= 4 bits
k2= 8 bits
k3= 12 bits
k4= 16 bits
so if you wanted to move only the first 4 bits on channel y40, you could write [mov k1y40 d0]or [mov k1y48 d0].
So my question is, can you do this with omron plc software.
thanks lee:nodi:
When using a mitsubishi PLC you can specifiy bits ie
k1= 4 bits
k2= 8 bits
k3= 12 bits
k4= 16 bits
so if you wanted to move only the first 4 bits on channel y40, you could write [mov k1y40 d0]or [mov k1y48 d0].
So my question is, can you do this with omron plc software.
thanks lee:nodi: