seb.unicycle
Member
My Setup: ControlLogix 5571 with a 1756-EN2T ethernet card
I have an Omega DPI8-EIT (Acts as a ethernet based server that support TCP or UDP communication) You send it a "X01" message and it returns the measured value type of interface.
The Omega unit does not support CIP communication but my understanding is that the EN2T can communicate with generic ethernet module using socket messages.
I configured a Generic Ethernet Module with "comm Format" set to None, because nothing else seems to make sense. I still get a 16#0204 Connection Request Error.
I started to look at the socket messaging but I feel a bit lost and would prefer to follow a clear example where someone setup communication to a generic ethernet module.
Any help or pointers would be appreciated.
Seb
I have an Omega DPI8-EIT (Acts as a ethernet based server that support TCP or UDP communication) You send it a "X01" message and it returns the measured value type of interface.
The Omega unit does not support CIP communication but my understanding is that the EN2T can communicate with generic ethernet module using socket messages.
I configured a Generic Ethernet Module with "comm Format" set to None, because nothing else seems to make sense. I still get a 16#0204 Connection Request Error.
I started to look at the socket messaging but I feel a bit lost and would prefer to follow a clear example where someone setup communication to a generic ethernet module.
Any help or pointers would be appreciated.
Seb