AlexDarsigny
Member
Hi,
I've been looking in the KB but I don't have the proper keyword to find it so I'm going to explain what I mean by re-starting the controller.
I'm using a L7 CPU and I'm testing program initialization logic (S:FS first scan bit). The only way I found to properly re-start the controller and have S:FS set on first scan is to go offline and do a full download. But it takes a while each time and I don't need to download since no logic are changed. I only want to re-start my program from the first scan.
Is there an option to stop the controller, re-initialize it and start it after from the first scan? Other than a power cycle obviously.
Thank you.
I've been looking in the KB but I don't have the proper keyword to find it so I'm going to explain what I mean by re-starting the controller.
I'm using a L7 CPU and I'm testing program initialization logic (S:FS first scan bit). The only way I found to properly re-start the controller and have S:FS set on first scan is to go offline and do a full download. But it takes a while each time and I don't need to download since no logic are changed. I only want to re-start my program from the first scan.
Is there an option to stop the controller, re-initialize it and start it after from the first scan? Other than a power cycle obviously.
Thank you.