TimD
Lifetime Supporting Member
Hello, I have a MicroLogix 1100 PLC with Ethernet configured and all is working.
My boss asked me if it was possible to send an email based on an alarm condition.
I figured, since the PLC has Ethernet, perhaps this was possible.
I went to RockwellAutomation.com and sure enough, the text description of the CPU lists email support under Features.
I have RSLogix 500, and looked up a few Explicit Message instructions, but nothing EMAIL specific, just peer-to-peer.
Anyone use an 1100 to send an email? Any help appreciated.
I'm aware (and use) of the WebPort, but I don't want to buy one for this small project (2 alarms total). Thanks!!!
My boss asked me if it was possible to send an email based on an alarm condition.
I figured, since the PLC has Ethernet, perhaps this was possible.
I went to RockwellAutomation.com and sure enough, the text description of the CPU lists email support under Features.
I have RSLogix 500, and looked up a few Explicit Message instructions, but nothing EMAIL specific, just peer-to-peer.
Anyone use an 1100 to send an email? Any help appreciated.
I'm aware (and use) of the WebPort, but I don't want to buy one for this small project (2 alarms total). Thanks!!!