Uniop HMI sofware

srehmanakhtar

Member
S
Join Date
May 2010
Location
nigiria
Posts
19
Dear Friends,

One of my client got two old Uniop HMI
1- eTop306 HW Version 768
2- eTop 05 HW version 3882

I need software to upload/download program for it.

Also need software for Siemens S5 to copy ladder logic from the PLC.

I will appreciate you help and support

Regards
Syed
 

Similar Topics

B
UniOP HMI software
Good afternoon everyone, Got a client with an oooold PLC/HMI setup. PLC is a SLC 5/02(logix 500 yes?) But for the HMI I've not a clue what...
Replies
2
Views
7,585
Bobogrammer
B
J
UNIOP HMI panel
Hello All, I've a UNIOP panel (EK-04) VER. 4.40,when i checked the plc status from its (SYSTEM) menu, the status says (PLC.......COMM ON 00) as...
Replies
2
Views
1,706
johneedw
J
B
Upgrading SLC 5/03 with SLC 5/05 Help with UniOp HMI
Hi All, we have a UniOp HMI ER-25T-0021-F display currently connected to a Allen Bradley SLC 5/03. We are using the DH485 port on the SLC to...
Replies
1
Views
2,476
Mickey
Mickey
A
Uniop hmi and ge controller cpu374
Has anyone ever had experience of data communication between a uniop hmi and the fanuc cpu374? I have setup the protocol in jmobile, however do i...
Replies
8
Views
2,425
RussB
RussB
M
Uniop HMI Remote Dispaly on PC
Hello, I am new to Uniop Hmi. Is it possible to connect PC to eTop 307 directly via Ethernet using the IP address. What I want to do is mirror...
Replies
3
Views
2,449
tamerelsab3
T
Back
Top Bottom