help please, old uniop hmi !!! - PLCS.net

kevbloke · July 1st, 2006, 08:47 PM

Hello chaps, i have an old uniop ek12 hmi, i also have designer 6 software but it would appear that this isnt what i require. can anyone point me in the right direction please.

monkeyhead · July 2nd, 2006, 12:16 AM

Put your panel into configuration mode and attempt an upload from the designer software. If you are not in configuration mode, Designer won't 'talk' to the HMI.

I only have Designer 5, so it may not be all the same, but i've never had problems connecting once the panel was in the right mode. This includes a model that wasn't on the list of HMI panels.

kevbloke · July 2nd, 2006, 01:44 AM

thanks for your help monkeyhead.much appreciated.

johneedw · February 9th, 2011, 03:42 AM

Dear friends,
I,ve uploaded a project from a uniop (ek-04) and download it to a new idetical one using designer6, all is alright!.. but the problem is that when i download the project(while the uniop in cofig. mode) , the downloading in pc side is achieved successfully but the uniop screen become empty when download is complete!..when i turn it off and power it on , the texts on the screen appear (self test ..the.. uniopver4.40 operation mode) then the screen become empty and no text or software appear on it!..
please help me to solve this problem...
john

jvdcande · February 9th, 2011, 06:54 AM

Dear John,

you better start a new thread with this question in stead of reviving and hijacking at least 11 old threads (as far as I can tell). I'm sure you'll find your information faster that way.

Regards,

srehmanakhtar · February 23rd, 2021, 06:13 AM

Dear Freinds,

I need designer 6 software to upload program from Uniop eTop 305 HMI.

I will appriciate if you can provide a link or send installation file please.

July 1st, 2006, 08:47 PM	#1
kevbloke Member Join Date: Jul 2004 Location: Kent uk Posts: 81	help please, old uniop hmi !!! Hello chaps, i have an old uniop ek12 hmi, i also have designer 6 software but it would appear that this isnt what i require. can anyone point me in the right direction please.

February 9th, 2011, 06:54 AM	#5
jvdcande Member Join Date: Apr 2002 Location: Menen Posts: 2,178	Dear John, you better start a new thread with this question in stead of reviving and hijacking at least 11 old threads (as far as I can tell). I'm sure you'll find your information faster that way. Regards, __________________ Jean Pierre Vandecandelaere Subject matter expert industrial maintenance & cooling VDAB Hoofdbestuur Gasthuisstraat 31 - 10e verd B-1000 Brussel Belgium

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Retain Controller Data in an HMI tag (Allen-Bradley)	Money4Nothing	LIVE PLC Questions And Answers	16	July 19th, 2007 08:38 AM
Uniop HMI on Ethernet UniNet having slow update	GaryP	LIVE PLC Questions And Answers	0	November 30th, 2005 06:26 PM
UNIOP HMI Reset	Steve_D	LIVE PLC Questions And Answers	3	March 19th, 2004 01:21 PM
E-series HMI and Modems	The_Wanderer	LIVE PLC Questions And Answers	5	February 25th, 2004 11:46 AM
I/O Comm. problem btw PLC & HMI	WFox	LIVE PLC Questions And Answers	7	December 31st, 2003 02:09 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

July 2nd, 2006, 12:16 AM	#2
monkeyhead Member Join Date: Sep 2004 Location: I'm right here Posts: 656	Put your panel into configuration mode and attempt an upload from the designer software. If you are not in configuration mode, Designer won't 'talk' to the HMI. I only have Designer 5, so it may not be all the same, but i've never had problems connecting once the panel was in the right mode. This includes a model that wasn't on the list of HMI panels.

July 2nd, 2006, 01:44 AM	#3
kevbloke Member Join Date: Jul 2004 Location: Kent uk Posts: 81	thanks for your help monkeyhead.much appreciated.

February 9th, 2011, 03:42 AM	#4
johneedw Member Join Date: Oct 2009 Location: asia Posts: 186	Dear friends, I,ve uploaded a project from a uniop (ek-04) and download it to a new idetical one using designer6, all is alright!.. but the problem is that when i download the project(while the uniop in cofig. mode) , the downloading in pc side is achieved successfully but the uniop screen become empty when download is complete!..when i turn it off and power it on , the texts on the screen appear (self test ..the.. uniopver4.40 operation mode) then the screen become empty and no text or software appear on it!.. please help me to solve this problem... john

February 23rd, 2021, 06:13 AM	#6
srehmanakhtar Member Join Date: May 2010 Location: nigiria Posts: 19	Dear Freinds, I need designer 6 software to upload program from Uniop eTop 305 HMI. I will appriciate if you can provide a link or send installation file please.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)