You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

Reply
 
Thread Tools Display Modes
Old February 23rd, 2021, 11:43 AM   #1
Cody Anderson
Member
United States

Cody Anderson is offline
 
Join Date: Nov 2020
Location: Brockway
Posts: 9
1734-IK Module with open collector encoder

Hello,

I have a 1734-ik module and trying to connect with an incremental encoder. After getting the module I realized that my encoder is open collector so sending my common as a signal. I see that the 1734-ik module is looking for a plus 24vdc signal. Is there anything I can do to make this work or do I need a new module? Could I use a resistor?
  Reply With Quote
Old February 23rd, 2021, 02:12 PM   #2
gclshortt
Member
Canada

gclshortt is offline
 
gclshortt's Avatar
 
Join Date: Dec 2014
Location: Ontario
Posts: 3,168
Yes, you can use a pull-up resistor for the encoder.
https://forum.digikey.com/t/what-doe...ector-mean/715
I would check with the manufacturer of the encoder to see what they recommend.
http://www.plctalk.net/qanda/showthread.php?t=115305

I hope this helps you out.
Regards,
__________________
Garry
https://www.accautomation.ca
Connect with us on Facebook: facebook.com/accautomation/
  Reply With Quote
Old February 23rd, 2021, 02:14 PM   #3
Cody Anderson
Member
United States

Cody Anderson is offline
 
Join Date: Nov 2020
Location: Brockway
Posts: 9
Okay that was what I was planning on trying next! Thank you for the help!!
  Reply With Quote
Old February 23rd, 2021, 03:01 PM   #4
Mickey
Lifetime Supporting Member
United States

Mickey is offline
 
Mickey's Avatar
 
Join Date: May 2003
Location: Palmdale,Ca
Posts: 10,453
More info...

https://www.digikey.com/en/articles/...vice-selection
__________________
Mickey

If you want happiness for an hour-take a nap. If you want happiness for a day-go fishing. If you want happiness for a month-getmarried. If you want happiness for a year-inherit a fortune. If you want happiness for a lifetime-help someone else.
----- Chinese Proverb
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
Configure AB Sercos Module jthornton LIVE PLC Questions And Answers 8 July 10th, 2020 05:26 PM
MicroLogix 1400 RTD Module Jason Ozolins LIVE PLC Questions And Answers 8 June 14th, 2016 03:12 PM
Check the I/O module status jcp LIVE PLC Questions And Answers 2 August 29th, 2011 06:09 AM
AB 1746-HS module - IMC 110 motion controller raj LIVE PLC Questions And Answers 12 February 20th, 2009 01:36 AM
SLC 5/03 data loss andydaoust LIVE PLC Questions And Answers 1 October 10th, 2002 07:38 PM


All times are GMT -5. The time now is 05:44 PM.


.