Hello. At work have a burnishing "tumbler" controlled by an Easy819 unit. We want to be able to choose between 2 cycle times. I'm thinking the easiest way (for me at least) would be to make the time parameter in the timer a variable, rather than adding a second timer, and use a toggle switch as an input.
But i'm stumped.
I don't know how to assign a value to the variable based on an input. My PLC knowledge is limited, and today is the first i've really messed w/ the Easy819. I bet it's easy, i'm just not getting it.
I'd appreciate any pointers you can send my way.
Thx.
Marty
But i'm stumped.
I don't know how to assign a value to the variable based on an input. My PLC knowledge is limited, and today is the first i've really messed w/ the Easy819. I bet it's easy, i'm just not getting it.
I'd appreciate any pointers you can send my way.
Thx.
Marty