How to crate a ladder dia. temp. comparator

mane_arvind

Member
M
Join Date
Apr 2007
Location
mumbai
Posts
2
How to crate a ladder dia .



To compare the temperature with the reference temp.



1. input temp. from RTD



2. Reference temperature. 150 deg cel.



3. if temp. is less than the 150 deg cel. 'GREEN' light indicate.



3. if temp. is more than the 150 deg cel. 'RED' light indicate.

 

Similar Topics

B
A little Ladder logic help
Hello, I am trying to replicate a piece of logic on the PLC5 onto an SEL RTAC. I am using ladder on SEL and FBD. I am having issue on the ladder...
Replies
9
Views
100
drbitboy
drbitboy
dalporto
Ladder Debounce
Hi all. Is this the simplest way to debounce inputs in Ladder (there are 2 points being debounced here)? The TOF drives the tag. I'm expecting...
2
Replies
15
Views
486
Ken Moore
Ken Moore
A
SEW IPOS Drive Assembler Code conversion to PLC Ladder Logic
I have a machine which is undergoing upgradation. As part of the process two SEW drives are being replaced., existing Gen B with new Gen C. The...
Replies
3
Views
193
JeffB
J
A
Tank level ladder program
Does anyone have RSLogix 5000 ladder diagram program of tank leveling (factory IO). Fill valve, discharge valve, set point, level, etc? I looked...
Replies
2
Views
155
agariza
A
N
ST v Ladder
Hi, I have a program running which is, occasionally, giving me problems. Although I'm a ladder stalwart I've used ST and SFC in its construction...
Replies
12
Views
435
dwoodlock
dwoodlock
Back
Top Bottom