Delta plc DSPA instruction

ilkay39

Member
Join Date
May 2018
Location
İstanbul
Posts
1
Hello everbody,

I used SX2 plc for tracking the position of the sun. But the outputs of the command (azimuth angle and zenith angle) are not compatible with real positon. Is there anybody used this instruction before?
Thanks in advance.

ilkay
 

Similar Topics

How i Can connect Delta plc, with Beckoff remote IO cards?
Replies
1
Views
55
Hi Everyone, I am currently trying to communicate ControlLogix PLCs via EtherNet/IP with Delta V DCS. There is a VIM2 card configured for...
Replies
1
Views
181
Does anyone know videos in English with trains for Delta PLC
Replies
1
Views
139
I have a SX2 plc and i'm getting 0-10v analog signal,but i need 10bar analog output in 0v can someone explain how its done
Replies
2
Views
508
Hey guys, I've a requirement that a two different PLC program should work in same system depending upon user input. Consider Program A is used...
Replies
11
Views
1,785
Back
Top Bottom