Help.. WinCC Runtime problem

HenkieD

Member
Join Date
Jul 2006
Location
Durbs
Posts
62
Hi All,

Please check image attached..
In my WinCC runtime I can't find my tree structure anymore, it also tells it's not active. This (PCS7) project was running fine before.
Funny enough if I start runtime from out of graphic designer it seems to communicate fine with the plc.

NOT_ACTIVE.jpg
 

Similar Topics

I have a problem when activating projects in WinCC 6.2. Everytime when i active a project, it's working properly, but next time when i activate...
Replies
2
Views
4,767
Hi, Im trying to open an old old Siemens WinCC project. It doesnt have to run i just want to look at the project in WinCC explorer. Its...
Replies
2
Views
516
Hello to everyone. I change the value of a "PQW" with a button in Wincc flexible. The code of the button is defined as M102.0. Value reset...
Replies
10
Views
4,519
Hi, I'm not a siemens expert but we recently converted an old siemens PC into a virtual machine so we could run it on modern hardware. It was...
Replies
16
Views
7,772
Hello Guys, I am trying to test HMI in TIA Wincc Professional V13 with my virtual machine with Rslogix emulator. Wincc is using OPC to...
Replies
0
Views
1,384
Back
Top Bottom