honeywell transmitters - PLCS.net

mobil1syn · August 13th, 2019, 02:28 PM

got a customer spec asking for the following. never used honeywell stuff or even heard of an instrument having a heater box. so is a heater box just to the the sensor from extreme temps and avoid condensation? having a hard time finding any information on the honeywell web site and havent heard back from a rep yet.

• Honeywell transmitters series 800 , HART 7 Configuration, with manifold and heated instrument boxes (as an option).

scott.lawrence · August 13th, 2019, 02:37 PM

which model Honeywell are you looking at?

danw · August 13th, 2019, 04:02 PM

You can start at Honeywell's site for the ST800

https://www.honeywellprocess.com/en-...s/default.aspx

Honeywell will sell a manifold valve or an instrument valve, but it's not their standard product.

To my knowledge Honeywell does not sell heated enclosures. If they do, they buy them like you would and mark them up.

A Honeywell distributor is likely to be able to handle the combination of transmitter, valve and enclosure.

Parker heated enclosure:

https://www.parker.com/Literature/Pa...Enclosures.pdf

OBrien heated enclosure:
https://www.obcorp.com/product/instr...res-protection

danw · August 13th, 2019, 05:04 PM

Honeywell's manifold and instrument valves:
https://www.honeywellprocess.com/lib...0Catalogue.pdf

mobil1syn · August 13th, 2019, 05:10 PM

re-reading my original post, it appears i wasnt clear.

the transmitter and block n bleed, is no big deal. the enclosure was the issue. thank you for the information danw. what is the purpose of the heated enclosures? im from socal, so cold protection is not something im familiar with.

danw · August 13th, 2019, 10:42 PM

Keeps the device out of the weather. Even though the instruments are NEMA 4x, when there's snow and ice covering the unit it's a pain to to access and work on.

An enclosure offers some minor amount fire protection, some resistance to corrosion exposure, and limits UV exposure. The current breed of Honeywell PTs have an ID plate on the top of the unit that is painted, not engrave like in the past, and UV exposure renders it unreadable in about a year outdoors. An enclosure will keep the UV off the ID plate.

We sell more sun shields than enclosures.

http://www.oilandgastechnology.net/s...20Brochure.pdf

It might pay to ask what the main purpose of the enclosure is.

NetNathan · August 14th, 2019, 11:17 AM

Heated enclosures are sometimes used to keep humidity out.

August 13th, 2019, 02:28 PM	#1
mobil1syn Lifetime Supporting Member Join Date: Dec 2018 Location: socal Posts: 29	honeywell transmitters got a customer spec asking for the following. never used honeywell stuff or even heard of an instrument having a heater box. so is a heater box just to the the sensor from extreme temps and avoid condensation? having a hard time finding any information on the honeywell web site and havent heard back from a rep yet. • Honeywell transmitters series 800 , HART 7 Configuration, with manifold and heated instrument boxes (as an option).

August 13th, 2019, 04:02 PM	#3
danw Member Join Date: Oct 2004 Location: midwest, USA Posts: 3,014	You can start at Honeywell's site for the ST800 https://www.honeywellprocess.com/en-...s/default.aspx Honeywell will sell a manifold valve or an instrument valve, but it's not their standard product. To my knowledge Honeywell does not sell heated enclosures. If they do, they buy them like you would and mark them up. A Honeywell distributor is likely to be able to handle the combination of transmitter, valve and enclosure. Parker heated enclosure: https://www.parker.com/Literature/Pa...Enclosures.pdf OBrien heated enclosure: https://www.obcorp.com/product/instr...res-protection Last edited by danw; August 13th, 2019 at 04:04 PM.

August 14th, 2019, 11:17 AM	#7
NetNathan Lifetime Supporting Member Join Date: Nov 2011 Location: Corona, CA Posts: 1,627	Heated enclosures are sometimes used to keep humidity out. __________________ **Control Freak** Net is where I be and Nathan is me.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Honeywell ControlEdge HC900	John Marston	LIVE PLC Questions And Answers	2	May 7th, 2019 10:56 AM
Siemens: 2-Wire current transmitters	BVG	LIVE PLC Questions And Answers	2	November 23rd, 2015 09:01 AM
iFix IGS and Honeywell 620	gitargr8	LIVE PLC Questions And Answers	3	August 22nd, 2012 12:15 PM
Serial Communication to Honeywell TPS	ry_fern	LIVE PLC Questions And Answers	1	January 10th, 2012 11:25 AM
HELP: Honeywell UDC 3300 and pyrometer	lanz	LIVE PLC Questions And Answers	2	November 9th, 2011 10:49 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

August 13th, 2019, 02:37 PM	#2
scott.lawrence Member Join Date: Feb 2010 Location: Oklahoma Posts: 173	which model Honeywell are you looking at?

August 13th, 2019, 05:04 PM	#4
danw Member Join Date: Oct 2004 Location: midwest, USA Posts: 3,014	Honeywell's manifold and instrument valves: https://www.honeywellprocess.com/lib...0Catalogue.pdf

August 13th, 2019, 05:10 PM	#5
mobil1syn Lifetime Supporting Member Join Date: Dec 2018 Location: socal Posts: 29	re-reading my original post, it appears i wasnt clear. the transmitter and block n bleed, is no big deal. the enclosure was the issue. thank you for the information danw. what is the purpose of the heated enclosures? im from socal, so cold protection is not something im familiar with.

August 13th, 2019, 10:42 PM	#6
danw Member Join Date: Oct 2004 Location: midwest, USA Posts: 3,014	Keeps the device out of the weather. Even though the instruments are NEMA 4x, when there's snow and ice covering the unit it's a pain to to access and work on. An enclosure offers some minor amount fire protection, some resistance to corrosion exposure, and limits UV exposure. The current breed of Honeywell PTs have an ID plate on the top of the unit that is painted, not engrave like in the past, and UV exposure renders it unreadable in about a year outdoors. An enclosure will keep the UV off the ID plate. We sell more sun shields than enclosures. http://www.oilandgastechnology.net/s...20Brochure.pdf It might pay to ask what the main purpose of the enclosure is.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)