I have replaced our SIEI drive with a new unit and it continues to blow the control board fuse every time I power the unit up (enable drive) it is a 2amp glass fuse, really has us scratching our heads. any input would be great, thanks guys.
SIEI drive blowing control board fuse
- Thread starter hotrod
- Start date
Similar Topics
Hello everyone
Can anybody help me to find any information about the SIEI XVy-3-33/58-KBA-EWH/VE.
I need the EDS for the CanOpen and the manual...
Hello all,
I am currently trying to program a PowerFlex 525, version 7.0. We had a power outage recently and when the power was restored, the...
Im trying to install a Siemens upgrade license using Automation License Manager v6.0.
I clicked D: mistakedly, and now I can not find a way to...
Hey guys.
As the title suggests, I need to configure a Danfoss Aquadrive FC202 inverter, so that its logic inhibits the local command when the...
Hello everyone, my son and I are working on building a metal lathe. I been waiting for a motor/speed controller donor from a treadmill. I finally...