sandipdash
Member
Dear all,
In one of my project i am using 5no. M340 PLC in network which are communicating with Vijeo Citect 7.1 scada.My problem is that the communication between the plc and scada breaks after every half an hours for 10 to 12 sec and again restore back.I have tried all possible method as per knowledge.
Plz suggest some valuable information to fix this issue.
Waiting for a valuable responce
In one of my project i am using 5no. M340 PLC in network which are communicating with Vijeo Citect 7.1 scada.My problem is that the communication between the plc and scada breaks after every half an hours for 10 to 12 sec and again restore back.I have tried all possible method as per knowledge.
Plz suggest some valuable information to fix this issue.
Waiting for a valuable responce