Aga3 flow calc in rtu
- Thread starter Ajmulkhan
- Start date
danw
Lifetime Supporting Member
An RTU is an RTU. A PLC is a PLC.
Doesn't the RTU have the AGA 3 calc built-in?
Here's Emerson's white paper on the AGA 3 calculation:
http://www.documentation.emersonpro...documents/instruction_manuals/d301224x012.pdf
Doesn't the RTU have the AGA 3 calc built-in?
Here's Emerson's white paper on the AGA 3 calculation:
http://www.documentation.emersonpro...documents/instruction_manuals/d301224x012.pdf
Mickey
Lifetime Supporting Member
What "RTU" do you have?
Software..see links.
http://www.instrumentationtoolbox.c...e-orifice-plate-flow-meter.html#axzz4YxQ8hOaI
https://www.google.com/#q=aga-3+flow+calculation+software
Software..see links.
http://www.instrumentationtoolbox.c...e-orifice-plate-flow-meter.html#axzz4YxQ8hOaI
https://www.google.com/#q=aga-3+flow+calculation+software
Similar Topics
Anyone have a function block or structured text routine they would like to share for the logix series plc? Figured I would ask before I put...
Hi,
I am writing a Controllogix program to calculate gas flowrate. I need the flow calcualtion for AGA3 standards. I have looked at the...
Hi,
The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001.
I will set the flow meter...
Dear All,
I need a sample PLC program to count the output pulse of a mass flow meter so that a specific amount of mass (for example 100gm)can be...
Has anyone installed Hp laserjet pro 4203 to OMNI 3000 or 6000 via ethernet..Is there a specific Config? I have a problem..Please advise