Hi,
I am trying to download a Panelview application from my laptop to a Panelview 600 with a direction connection from the network card on my computer to the ethernet terminal on the Panelview.
Under the Communication Setup:
-DHCP is disabled
-IP address is 192.168.0.56
-Subnet mask is 255.255.255.0
-Interscan delay is 100ms
I have created an Ethernet/IP driver in RSLinx called 'panelview'
-IP address is 192.168.0.56
-Subnet mask is 255.255.255.0
I have also given my computer a static IP of 192.168.0.10.
The 'panelview' driver does not detect any device on the network. I am using a crossover cable to connect my computer to the Panelview. When I ping 192.168.0.56, everything looks fine.
This is the first time I've used a Panelview, so any help would be appreciated.
Thanks!
Ben
I am trying to download a Panelview application from my laptop to a Panelview 600 with a direction connection from the network card on my computer to the ethernet terminal on the Panelview.
Under the Communication Setup:
-DHCP is disabled
-IP address is 192.168.0.56
-Subnet mask is 255.255.255.0
-Interscan delay is 100ms
I have created an Ethernet/IP driver in RSLinx called 'panelview'
-IP address is 192.168.0.56
-Subnet mask is 255.255.255.0
I have also given my computer a static IP of 192.168.0.10.
The 'panelview' driver does not detect any device on the network. I am using a crossover cable to connect my computer to the Panelview. When I ping 192.168.0.56, everything looks fine.
This is the first time I've used a Panelview, so any help would be appreciated.
Thanks!
Ben