Mayur118040
Member
Hi All,
Currently i have one delta make plc in which i want to add the recipe
where below is my requirement.
1.i want to increment the real value at particular rate with respect to
time
E.g. 3deg/min from zero till one setpoint value 500 is reached for first step.
& for second step i value should be increased from 500 to 800
with the rate 5deg/min. likewise
please find the attached image for referance.
please suggest the valuable solution for this on urgent basis.
Best regards
Mayur
Currently i have one delta make plc in which i want to add the recipe
where below is my requirement.
1.i want to increment the real value at particular rate with respect to
time
E.g. 3deg/min from zero till one setpoint value 500 is reached for first step.
& for second step i value should be increased from 500 to 800
with the rate 5deg/min. likewise
please find the attached image for referance.
please suggest the valuable solution for this on urgent basis.
Best regards
Mayur