1756-esmcap lifespan

Jmeadows7676

Member
Join Date
Oct 2013
Location
Alabama
Posts
160
Does anyone know off the top if there is an lifespan on the 1756-esmcap modules found in 1756-L7 PLCS? I was asked this question and done a little searching but can't seem to find a recommendation on replacement interval if any. :confused:

Thanks, for the Help
 
OK, I called my Local Rockwell Rep and he sent me Knowledge base article 114726, covers it pretty well. 10+ years life span.
 
Old thread posts, but THANK YOU!

I know this is an old post but I have to say thank you for the information. I have spent the past hour searching google and Rockwell Knowledge Base without finding the answer. They sure didn't make that TechNote easy to find in their database...
 

Similar Topics

Hey Guys, I thought I knew the answer to this, but after some looking I am starting to doubt myself. I thought the 1756-EN2TR would allow you to...
Replies
2
Views
79
We had a site where a rat gnawed through some fiber optic cables which (obviously) prevented communication to a remote rack entirely. We, and the...
Replies
3
Views
99
We are in the process of converting our plants from PLC5 controllers and 1771 I/O into ControlLogix PLCs and Logix I/O. Up until now we used 1756...
Replies
1
Views
80
Hello all, I have a 1756-EN2TR dual-port Ethernet IP Module attached to my 1756-L73 PLC. I currently have hazard symbols over both the top and...
Replies
9
Views
176
Hi all I have a ControlLogix 1756-L71SP that i want to use for general PLC applications, not safety. I am running Studio5000 v33, i can't...
Replies
2
Views
116
Back
Top Bottom