connecting to delta plc wia panel master hmi from com2 or com3

reza.akbari

Member
R
Join Date
Apr 2015
Location
mashad
Posts
9
Hello to every one
I have a delta plc with model dvp12sa2
As you know this type of plc has 3 coms , com2 and com3 are rs485
I want to connect panel master with plc through com2 or com3 but i cant.
Is there any setting with this model of plc because with ss2 model of delta plc there is no problem and i could connect plc and panel master hmi through com2
Thanks for your attention
 

Similar Topics

M
problem about connecting Labview to Delta PLC
hi dears at first i'm sorry for my weak English! i connected labview to Delta PLC with DCS Module. and i created I/O server with Modbus TCP...
Replies
0
Views
2,464
mostafamalekiazad
M
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
78
jscampbell210
J
K
Connecting FactoryTalk Datalog to MariaDB
Hello, I was looking to store some values from our FactoryTalk Application using Datalog to a MariaDB. I see there is quite a bit of documentation...
Replies
1
Views
86
drbitboy
drbitboy
D
Connecting to a PLC through VM Ware
I haven't encountered problems connecting to a PLC through VM Ware but I am with this particular machine. I'm running Windows 7 on a Windows 10...
Replies
8
Views
219
arpus4KM
A
M
Connecting Different controllers (brands) with same I/O devices - Demo Station Design
Hi, I want to build a demo station to test devices and programs and I need some help with it. I want to connect GuardLogix, Piltzmulti and...
Replies
1
Views
149
JeffKiper
JeffKiper
Back
Top Bottom