Mitsubishi fx-3g40m interfacing with kepware

sonjacksy

Member
S
Join Date
May 2013
Location
india
Posts
36
Hi to all
i am using pc to fx-3g40m the usb cable and when i searched in kepware am not getting any related with usb what am getting is ethernt or com serial ports and i tried a lot but not getting the connection so please suggest me which driver i need to select in kepware mitsubishi fx or something else and how to link with usb
 

Similar Topics

T
Mitsubishi A172SHCPUN Run/Stop keys
I'm looking to get some spare keys for this PLC. Does anyone know a source or have a part number? My searches are turning up nothing at the moment.
Replies
1
Views
64
goghie
G
C
Mitsubishi R08SFCPU and RD78G8 communication to FR-E800SCE (Safety Version) on CC-link IE TSN
I'm struggling to get an FR-E800SCE to work on CC-Link IE TSN. I'm sure the issue is with the drive, when I plug in the network cable I get no...
Replies
1
Views
90
cottagewood
C
S
Hi , Where i can find Mitsubishi PLC Card end of line & replacement model details. i am looking for Q02CPU replacement model. Please advice. thanks
Hi , Where i can find Mitsubishi PLC Card end of line & replacement model details. i am looking for Q02CPU replacement model. Please advice. thanks
Replies
2
Views
126
Sundar4163
S
V
Error ES: 01800001 with Mitsubishi FX1N
Hi guys, Im trying to set the real time clock in my Mitsubishi FX1N, but it shows this error ES: 01800001 I have good communication with...
Replies
3
Views
142
alan_505
A
L
Polynomial fitting on Mitsubishi FX5u
Hello there is a way to do the polyfit on 3rd degree on this plc. for imput i have a munimum value of 5 X and 5 Y value for example Measured...
2 3 4
Replies
58
Views
2,575
luca72
L
Back
Top Bottom