Micrologix 1000 HSC

ggchavhan

Member
G
Join Date
Nov 2006
Location
pune
Posts
135
Dear all

I want to configure 660 ppr encoder to micrologix 1000 I used HSC instruction as per help I turned on C5:0/UA bit on, but I am not getting high speed pulses for measurment, It is scanning as per regular scan, i.e. PLC is missing some pulses during the same scan. Please guide me in this regard.

Thanks.
 
there is a specific routine for HSC the counter should be in that routine to do high speed function
I don't know which routine it is I don,t have RSL500
 

Similar Topics

H
hsc micrologix 1000
I need help how to use hsc instruction in micrologix 1000
Replies
2
Views
2,507
kunal07
K
Z
Micrologix 1000 w/HSC and Flow Meter
I am setting up a compact and low cost machine that will dose between 15 and 60 ml of liquid depending on the setpoint the user inputs. I have set...
Replies
1
Views
4,009
Pierre
Pierre
P
PLC MICROLOGIX 1000 AND 1761-NET-ENI
"Hello! Good day! Excuse me, I have a question regarding the 1761-NET-ENI. RSLinx has already detected it but it's not connecting to the PLC...
Replies
4
Views
78
roxusa
R
M
Micrologix 1000 query
Hi all, We have a very old pit pump system running on Micrologix 1000. Now, whenever there is an alarm for high conductivity, we want that alarm...
Replies
5
Views
1,247
Ken Roach
Ken Roach
T
Micrologix 1000 Software
Looking at a Micrologix 1000 1761-L32AWA, I tried to connect using the 1761-CBL-PM02 through a Serial to USB converter (This setup was used...
Replies
2
Views
978
James Mcquade
J
Back
Top Bottom