safety relay guard master

e manikandan

Member
Join Date
Dec 2013
Location
*******
Posts
3
Hi to all,
Now I am using safety relay guard master(MSR131RTP)

Trouble shooting of the relay is very difficult

Is there any trouble shooting guide is there for that relay

Please help me on this issue
 
What is the problem you are having?
How do you have it wired?
There are several options for operation and connection.
 
Thank you ur replay Danatomega
I am using two channel with manual reset ,no output monitoring
Two tape switch are connected in series and making my two channels

My safety relay module power is stable when I was connected my first channel and I tried to connect my second channel ,module power starts flashing continuously.
But I checked my channels continuity is not good

After replace the new tape switch its good

I
 

Similar Topics

Guys, I need your advice regarding connecting a door guard safety relay to the output of a Sauer-Danfoss Hydraulic Valve Amplifier and the...
Replies
13
Views
5,581
Can any help me this is a new style of safty relay to us and is very hard to trouble shoot can anyone give me and my coworkers tips on trouble...
Replies
5
Views
4,349
I have an application where I want to use a safety relay in combination with a flame detector as the sensing element. The flame detector has relay...
Replies
23
Views
923
I want to improve a semi custom product I am delivering to a customer with implementation of safety relays. The system is fairly simple with just...
Replies
5
Views
543
Back
Top Bottom