Machine Expert v1.1 Simulation

Sham

Member
S
Join Date
Sep 2019
Location
Australia
Posts
152
Hi All,

Are you guys aware if Machine Expert has any simulator in it? SoMachine Basic had a nice simulator with programming pretty easy, this one looks much more messy that it. Anyways, any clues abut simulations in Machine Expert?

Thanks
 
Machine expert is Codeys and yes it has a simulator which I like because I'm used to it.
Anyway the application engineer from Schneider Electric suggested to continue using SoMachine 4.3 until Machine Expert matures enough.
 
Machine Expert-Basic has taken the place of SoMachine Basic as well. I have not used the simulator in that at all, though.
 
kallileo said:
Machine expert is Codeys and yes it has a simulator which I like because I'm used to it.
Anyway the application engineer from Schneider Electric suggested to continue using SoMachine 4.3 until Machine Expert matures enough.
Click to expand...

I am just unable to figure out how that is done in that sofware.. can you please guide me a little bit in that?
 

Similar Topics

P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
63
Para
P
C
Modicon M221 Machine Expert Basic Write Var
Hey Programmers, Heres todays puzzle I was trying to solve... I have a Modbus TCP network with two Modicon M221 controllers live on my work bench...
Replies
0
Views
461
ControlSystems
C
X
Machine Expert M251 Read VAR Block with Serial Line Slave
Hi, I am trying to use READ VAR function block in Modicon M251 to read data from 1 unit of Modbus RTU slave. However the READ VAR return error...
Replies
0
Views
783
xcyong89
X
M
Machine Expert Basic Online Editing issue
In the last two months I have had an issue after making some online changes between the software and an Schneider M221 PLC via ethernet network...
Replies
0
Views
1,081
MurrayR
M
A
Machine Expert problem trying to download or upload a project to M221
Hi guys! I'm trying to download a project to the controller, who already has an aplication running protected by a blank password. The option to...
Replies
3
Views
2,885
goghie
G
Back
Top Bottom