Connecting PLC and RFID

Hy, for my college project i need to connect a RFID device using serial connection via PLC and make it do something (i.e. light a light bulb). The logic behind it is in ledder diagrams which i know very well. So my problem is just the connection part of things. I tried searching the net but i found no usable information about it. I know the connection is different and handled on each PLC different that's why i am asking here.I need to read the RFID tag from the reader then use that information in the PLC program. The PLC i am using is CECC-S from Festo, using Codesys 3.5 by Festo and the RFID is UTS-1. Here are the documents for the RFID

https://docdro.id/KhNKbVf

https://docdro.id/4HabEHD

First, try to communicate your PC with your RFID device. Then continue with your PLC.

Here is the link to the festo installation instructions.
https://www.festo.com/net/en_corp/S...954/573539/CECC-D_LK_S_2018-04b_8060506g1.pdf

It has no +5V pin, so you will need to find a 5V power supply suitable for your device.

Let us know how you think you would wire it and then we will point out any mistakes.