juancrangel
Member
That such a dear friends.
I have the following problem in the configuration of a computer server and a computer client or work station. The server this connected one to the process net through the KepserverEX registered v.4.170.328. And the connection with the station of work client is ethernet TCP/IP. I have communication problems between them and the configuration of the Server it is the following one to the similar of the Client like one observes in the images. I also place the configuration of the kepserver.
As you he can observe in the image rsv32_11 this the configuration of the kepserver in the server and just as you leave it works correctly and he doesn't have communication problems.
In the image rsv32_22 he meets the configuration of the servidor with the RSView32 Works, the configuration is observed of the one: "Channel", of the "Node", the one links of the server with the kepserver in local way, the one links of the tags with the kepserver opc, in the "Macro Starup" it places the command "RTDataServerOn/NETDDE" that not you if it would apply in my case but in the manual he said something of this. In the "Starup" it is paymasters the options in the image, and for I finish the "Project Path" this addressed in the own computer server.
In the image rsv32_33 it places some tags of the system like one observes and for the status it doesn't present communication problems, and one can observe that all the fields have activity, this in way run.
OK in the configuration of the computer client, copy the application of the server and the application of the kepserver exactly, in the configuration of the kepserver one doesn't eat to make so that far he sees the information of the server, however he leaves it the same as that of the server.
In the figure rsv32_44 this the configuration of the computer client in the RSView32 Works, with the difference is that the "Project Patch" I have it associated to the computer servant that he calls himself "JKXP3." The node also places it as type "remote" and the name of the computer server is the "\ \ Jkxp3."
In the figure rsv32_55 one can he observes that there is a communication problem with the server, the codes of errors don't get them and the error message believes that he refers to the address with the server the message it is: "Client: Could not connect to the opc server" and the one numbers of error it is the "4."
I wait to have explained to myself very since it is a little complicated for that reason it uses images.
Thank you friends for everything.
Que tal estimados amigos.
Tengo el siguiente problema en la configuracion de un computador servidor y un computador cliente o estacion de trabajo. El servidor esta conectado a la red de proceso a traves del KepserverEX v.4.170.328 registrado. Y la conexion con la estacion de trabajo cliente es ethernet TCP/IP. Tengo problemas de comunicacion entre ellos y la configuracion del servidor es la siguiente al igual del Cliente como se observa en las imagenes. T****** coloco la configuracion del kepserver.
Como se puede observar en la imagen rsv32_11 esta la configuracion del kepserver en el servidor y tal como se ve funciona correctamente y no tiene problemas de comunicacion.
En la imagen rsv32_22 se encuentra la configuracion del servidor con el RSView32 Works, se observa la configuracion del: "Canal", del "Nodo", el vinculo del servidor con el kepserver en modo local, el vinculo de los tags con el kepserver opc, en el "Macro Starup" coloque el comando "RTDataServerOn/NETDDE" que no se si aplicaria en mi caso pero en el manual decia algo de esto. En el "Starup" se encuentra habilitados las opciones en la imagen, y por ultimo el "Project Path" esta direccionado en la propia computadora servidor.
En la imagen rsv32_33 coloque unas tags del sistema como se observa y por el estatus no presenta problemas de comunicacion, y se puede observar que todos los campos tienen actividad, esto en modo run.
OK en la configuracion del computador cliente, copie exactamente la aplicacion del servidor y la aplicacion del kepserver, en la configuracion del kepserver no se como hacer para que remotamente vea la informacion del servidor, sin embargo lo deje igual que el del servidor.
En la figura rsv32_44 esta la configuracion del computador cliente en el RSView32 Works, con la diferencia es que el "Project Patch" lo tengo asociado al computador servidor que se llama "JKXP3". El nodo t****** lo coloque como tipo "remoto" y el nombre del computador servidor es el "\\Jkxp3".
En la figura rsv32_55 se puede observa que hay un problema de comunicacion con el servidor, los codigos de errores no los consigo y el mensaje de error creo que se refiere a la direccion con el servidor el mensaje es: "Client: Could not connect to the opc server" y el numero de error es el "4".
Espero haberme explicado bien ya que es un poco complicado por eso use imagenes.
Gracias amigos por todo.
I have the following problem in the configuration of a computer server and a computer client or work station. The server this connected one to the process net through the KepserverEX registered v.4.170.328. And the connection with the station of work client is ethernet TCP/IP. I have communication problems between them and the configuration of the Server it is the following one to the similar of the Client like one observes in the images. I also place the configuration of the kepserver.
As you he can observe in the image rsv32_11 this the configuration of the kepserver in the server and just as you leave it works correctly and he doesn't have communication problems.
In the image rsv32_22 he meets the configuration of the servidor with the RSView32 Works, the configuration is observed of the one: "Channel", of the "Node", the one links of the server with the kepserver in local way, the one links of the tags with the kepserver opc, in the "Macro Starup" it places the command "RTDataServerOn/NETDDE" that not you if it would apply in my case but in the manual he said something of this. In the "Starup" it is paymasters the options in the image, and for I finish the "Project Path" this addressed in the own computer server.
In the image rsv32_33 it places some tags of the system like one observes and for the status it doesn't present communication problems, and one can observe that all the fields have activity, this in way run.
OK in the configuration of the computer client, copy the application of the server and the application of the kepserver exactly, in the configuration of the kepserver one doesn't eat to make so that far he sees the information of the server, however he leaves it the same as that of the server.
In the figure rsv32_44 this the configuration of the computer client in the RSView32 Works, with the difference is that the "Project Patch" I have it associated to the computer servant that he calls himself "JKXP3." The node also places it as type "remote" and the name of the computer server is the "\ \ Jkxp3."
In the figure rsv32_55 one can he observes that there is a communication problem with the server, the codes of errors don't get them and the error message believes that he refers to the address with the server the message it is: "Client: Could not connect to the opc server" and the one numbers of error it is the "4."
I wait to have explained to myself very since it is a little complicated for that reason it uses images.
Thank you friends for everything.
Que tal estimados amigos.
Tengo el siguiente problema en la configuracion de un computador servidor y un computador cliente o estacion de trabajo. El servidor esta conectado a la red de proceso a traves del KepserverEX v.4.170.328 registrado. Y la conexion con la estacion de trabajo cliente es ethernet TCP/IP. Tengo problemas de comunicacion entre ellos y la configuracion del servidor es la siguiente al igual del Cliente como se observa en las imagenes. T****** coloco la configuracion del kepserver.
Como se puede observar en la imagen rsv32_11 esta la configuracion del kepserver en el servidor y tal como se ve funciona correctamente y no tiene problemas de comunicacion.
En la imagen rsv32_22 se encuentra la configuracion del servidor con el RSView32 Works, se observa la configuracion del: "Canal", del "Nodo", el vinculo del servidor con el kepserver en modo local, el vinculo de los tags con el kepserver opc, en el "Macro Starup" coloque el comando "RTDataServerOn/NETDDE" que no se si aplicaria en mi caso pero en el manual decia algo de esto. En el "Starup" se encuentra habilitados las opciones en la imagen, y por ultimo el "Project Path" esta direccionado en la propia computadora servidor.
En la imagen rsv32_33 coloque unas tags del sistema como se observa y por el estatus no presenta problemas de comunicacion, y se puede observar que todos los campos tienen actividad, esto en modo run.
OK en la configuracion del computador cliente, copie exactamente la aplicacion del servidor y la aplicacion del kepserver, en la configuracion del kepserver no se como hacer para que remotamente vea la informacion del servidor, sin embargo lo deje igual que el del servidor.
En la figura rsv32_44 esta la configuracion del computador cliente en el RSView32 Works, con la diferencia es que el "Project Patch" lo tengo asociado al computador servidor que se llama "JKXP3". El nodo t****** lo coloque como tipo "remoto" y el nombre del computador servidor es el "\\Jkxp3".
En la figura rsv32_55 se puede observa que hay un problema de comunicacion con el servidor, los codigos de errores no los consigo y el mensaje de error creo que se refiere a la direccion con el servidor el mensaje es: "Client: Could not connect to the opc server" y el numero de error es el "4".
Espero haberme explicado bien ya que es un poco complicado por eso use imagenes.
Gracias amigos por todo.