Creating a Placeholder - Magelis

martin1

Member
Join Date
Apr 2008
Location
Britan
Posts
43
Hi all,

I am having difficulty setting up a placeholder using Vijeo Designer.

I am unable to point the external tags in my project to the tags on M340.

Has anyone done something similar that could offer some advice?
 
Hi all,

I am having difficulty setting up a placeholder using Vijeo Designer.

I am unable to point the external tags in my project to the tags on M340.

Has anyone done something similar that could offer some advice?

I am not quite sure what you mean by placeholder ?
 

Similar Topics

The idea here is to provide for a brief rapid influx of message codes while preventing sequentially repeating the same message. i.e. if two...
Replies
23
Views
436
Hello everyone, In a factory where we installed Citect 7.20 the computer began to show the first signs of end of life. They never considered...
Replies
0
Views
57
Hi everyone, I'm a last year student at the university in Ghent, and for my thesis i need to write a TwinCAT program that writes data to a .daq...
Replies
0
Views
119
When I go to create a new module in Studio 5000 I can't enter any information for the IP Address or change any other fields. Is there any fix to...
Replies
1
Views
238
Hello I am kind of new to the Rockwell world, i've mainly worked with Siemens and Schneider untill now. I am to make a HMI application running...
Replies
7
Views
1,019
Back
Top Bottom