Moog PLC

Tihomir

Member
T
Join Date
Jun 2006
Location
Plovdiv
Posts
12
Hello,

At work we have an Italian machine with MOOG PLC.
The parts counting output is executed as per attached picture.
Could someone help me to connect with the PLC.
And to change the timer to TON.
I had experience with SIEMENS a long time ago, but with their (MOOG) software I do not feel OK.

Cattura.PNG
 

Similar Topics

S
Moog plc
Has anyone got a copy of mass the moog plc software . I want to try it as my company is getting some of there control systems and I want to get a...
Replies
2
Views
117
Speedy1
S
D
Delta HMI to control Moog Animatics Smart Motor
I´m working with a Delta HMI (model: DOP-B07E515) and Moog Animatics Smart Motor series 5. I need to communicate both devices and send & get...
Replies
4
Views
3,683
adisharr
A
A
moog servo valve D 684
Dear All I am facing a problem on injection machine related to moog servo valve(when we give the comand to stop the mold at 16mm it goes...
Replies
2
Views
2,877
mordred
mordred
P
AB PLC, Rslogix 5000, alarm issue
Hi folks, in the alarm manager of Rslogix 5000, the tag-based alarm has been created. But when I tried to change the condition, it was found the...
Replies
0
Views
27
PLCbug123
P
H
PLC NAT Suggestions.
I know this topic has been brought up a few times, but i had some specific questions. I have installed several 1783-NATR devices and they have...
Replies
0
Views
50
HoldenC
H
Back
Top Bottom