Lenze E84DFYER Profinet Firmware (protec 8400)

hein123

Member
Join Date
Aug 2010
Location
Uitenhage
Posts
93
Hi,

can somebody here please help as I get no response from Lenze.
I need the following firmware
Profinet E84DFYER V02.08.01.00

Attached is a screenshot.

Or is it possible to upload the firmware from an existing drive?

image.png
 

Similar Topics

Kindly, has anyone tried to control Lenze servomotors with Siemens S120 drives ? Any special hints ? Have some concerns for the resolver and servo...
Replies
5
Views
180
Hello everyone, One of our machine we use Siemens Cpu315-2dp. And this cpu communicate with 4 Lenze servo drives series 9300 via profibus. Also...
Replies
0
Views
145
Hello guys, I'm trying to use the Lenze GDC 4-14 with the system bus adapter 2177, but it doesn't appear in the communication window. It's like I...
Replies
0
Views
195
Hi everyone. I got the endless "booting/connection" sequence on my Lenze 9400 HighLine. EZAEBK1001 Keypad is showing "question mark" while trying...
Replies
1
Views
260
Hi, I used to use my Lenze EMF2102IBCV001 LECOM a/B module to connect to many Lenze 9300 series servo drives. Now I would like to connect to Lenze...
Replies
1
Views
469
Back
Top Bottom