Delta PLC connections

kaudio

Member
Join Date
Feb 2014
Location
NORCAL
Posts
6
Hi,

Have a very newbie question but needed some help. I have a Delta DVP-14SS and I was trying to find out the name and where I can get the connections that go into the pins and convert to a screw terminal. Also anyone know where I can get a power cord that snaps on as well? Looked all over the internet and just couldn't find these simple items.

Any help would be greatly appreciated.

dvp.jpg
 

Similar Topics

Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
20
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
101
I have downloaded COMMGR 1.15 software on my laptop. After downloading it works. When I stop and start the program again it doesn't work. It is...
Replies
2
Views
151
How i Can connect Delta plc, with Beckoff remote IO cards?
Replies
2
Views
174
Hi Everyone, I am currently trying to communicate ControlLogix PLCs via EtherNet/IP with Delta V DCS. There is a VIM2 card configured for...
Replies
1
Views
275
Back
Top Bottom