Mitsubishi GX Developer Projects

riyajahamad

Member
Join Date
Jun 2002
Location
Pune-India
Posts
133
Hi Everybody,
I am programming of a Mitsubishi PLC using GX Developer (V 8), As I never done programming of Mitsubishi, Allen Bradly is my feverest PLC Brand and having command on the same. Can anybody post some Projects which done on GX Developer which help me to understand the new Programming method (Mitsubishi) more easily.
Thanks in advance.
 
Hi Riyaj! ( TC SPRING GUY !!! )

i would be interested to have a look at your code.
By the way I am also placed in Pune.

reachasp ( Amit )
 
Thanks Amit for post.
But I don't remember are we mate before.
Please mail me or contact me at 9822792135 to share our knowlegde.
Bye,
Riyazahmad.
 

Similar Topics

Hi One of the PLC's that I maintain/update is a Mitsubishi Q-Series, probably installed about 10 years ago. At the moment, ALL the wires from...
Replies
13
Views
1,132
Hi everyone, I'm working on a Mitsubishi Q series PLC whose code was developed in Mistubishi's GX IEC Developer v7.04. I looked online for GX IEC...
Replies
9
Views
1,363
Hi everyone, I'm working on a Mitsubishi Q series PLC whose code was developed in Mistubishi's GX IEC Developer v7.04. I looked online for GX IEC...
Replies
0
Views
477
On our system, on the HMI we've got a page of setpoints. These are the values at which alarms are set (e.g. a high temperature alarm or a low...
Replies
4
Views
1,190
On our PLC we've got a HMI where the operator can enter a target rotor speed in RPM. When target speed is enabled, M70 = TRUE. Then the operator...
Replies
19
Views
2,761
Back
Top Bottom