S5 PLC Siemens Softnet V6 LSAP

frobie

Guest
F
Hello I am currently upgrading Win 3.11 system to Win2000 (cusomer request) and have run into a snag. I am new to S5 and prfibus but have figured out the majority of the migration with an exception. I am using an S5 95U PLC communicating to InTouch via a Siemens 5613 profibus card with a Wonderware L2FDL IOServer, seems to going ok. The new softnet V6 is WAY different that the old Sinec software but I have been on Siemens Tech Support and have work most of the configuration out except for the SAP's (in COM DB1) and the LSAP list in Softnet V6. Can anybody explain how to set the LSAP's in Softnet?

Here is an example of my PLC1 app in COM DB1 (station 31=5613):

status byte SAP
PLC link to station send recieve local remote
2 180 181 3 2

31 177 178 32 2

Here is an example of my PLC2 COM DB1
PLC link to station send recieve local remote
1 180 181 2 3

31 177 178 32 3


Now for SOFTNET TOPIC PLC1:
local remote
profibus adderss 31 1
LSAP ?? ??

Do I set the local LSAP TO 32 and remote to 2?
 

Similar Topics

Hi everyone, I want to upload the program from my CPU317TF-2 DP to my PC via connecting to CP 343-1 Advanced since it has LAN ports and the CPU...
Replies
1
Views
117
Buona sera, Ho dei problemi nell' interfacciare PLC S5 con HMI 2a Gen. Siemens (ad esempio KTP400) tramite IBH Link S5++. il mio obbiettivo è solo...
Replies
0
Views
56
Hey when I turn on my Siemens PLC CPU 216-2 after runing 10 minute it's stop and showing SF indication after I turn off and some time later turn...
Replies
0
Views
90
Hi Guys, I am trying to establish communication over profinet between Siemens S7-1200 PLC as IO device and codesys plc as IO controller. But I am...
Replies
39
Views
2,049
Hi there! This is something so old and having machine with it....... Last time unit was powered around 3yr ago and it did not work since than...
Replies
5
Views
186
Back
Top Bottom