kevintfa Member K Join Date Jun 2005 Location Windsor, Ontario CANADA Posts 22 Aug 23, 2007 #1 i am using step 7 with wincc flexible to edit a simatic hmi station. i want to display the accumulated time and be able to write to the set time to a timer on the plc program. Any Suggestions?
i am using step 7 with wincc flexible to edit a simatic hmi station. i want to display the accumulated time and be able to write to the set time to a timer on the plc program. Any Suggestions?
PeterW Member P Join Date Jun 2006 Location Calgary, AB Posts 2,531 Aug 23, 2007 #2 Don't use the ladder timers, use the Standard FB timers, these have presets easier to use with HMI's. There's a recent thread on the subject if you look down the threads. EDIT: This one http://www.plctalk.net/qanda/showthread.php?t=31231
Don't use the ladder timers, use the Standard FB timers, these have presets easier to use with HMI's. There's a recent thread on the subject if you look down the threads. EDIT: This one http://www.plctalk.net/qanda/showthread.php?t=31231
kevintfa Member OP K Join Date Jun 2005 Location Windsor, Ontario CANADA Posts 22 Aug 23, 2007 #3 Thanks For Your Help, I Will Try It Out. First Time Working With Siemens.....