testsubject
Member
For me, 1 Tab = 4 spaces.
Tabs vs Spaces?
- Thread starter AustralIan
- Start date
AustralIan
Member
OP
I set my default tabsize to 80. If you use tabs your code is unimportant and will be displayed off screen. 
drbitboy
Lifetime Supporting Member
I set my default tabsize to 80. If you use tabs your code is unimportant and will be displayed off screen.
Finally, the correct answer!
Similar Topics
This is s stupid thing but it drives me crazy. 5000 seems to open new lad windows to the far left every time. I tend to like to have my Tags...
Does anyone know how to, if its possible, get the bar at the top of RS Studio that displays all your open routines as tabs, to shrink width of...
Good morning all.
I replaced a 315-2PN/DP CPU.
I downloaded the hardware config and the blocks.
After this exercise some HMI tabs are missing.
I...
I don't think I'm going crazy..
Lately when I have multiple routines open in the ladder editor and I open another one my tabs at the bottom only...
Hi guys I'm new to using Citect. I've been given the task of updating a v 5.3 Project to a v7. I was wanting to know how to change the top menu...