Artitimberwolfm1
Member
Hi we currently have a Micrologic 1200 running an automated saw program. If I plug in a memory module will it automatically write the program to it or does it have to be done off line?
Micrologic 1200 memory question
- Thread starter Artitimberwolfm1
- Start date
OkiePC
Lifetime Supporting Member
It has to be done using RSLogix 500 software and it will require you to put the PLC into program mode briefly.
Similar Topics
Hey guys,
My colleague recently gave me an Allen Bradley micrologix 1200, I only have rslogix micro starter lite on my laptop. From what I can...
Dear all
i have problem with micrologic 1200 with 1672-IR4 RTD module, when im plug the 1672-IR4, micrologix 1200 error "The maximum number of...
Hello ALL,
I have a job coming up where we will be using multiple Rockwell Micrologix 1200 PLC's with on-board ethernet. Can I read their IP...
Ok, I have a micrologic 1200 plc that I'm tring to get to communicate with a panelview 300. It has a 1761-cbl-pm02-ser.C cable that plugs into the...
HEllo Experts
I am trying to communicate between Wonderware and micrologic though 1761-net-eni module. I installed IO server DASABCIP and try to...
