drive exec and rslinx

remullis

Member
R
Join Date
Oct 2012
Location
Georgia
Posts
179
I have two PC's with Rockwell Software running on them so I can access the same equipment and files using rslogix5000, device net and drive exec. On one of the systems I can't go online with drives, but one I can. This is accessing the same IP through either pc box. I have been able to access these IP's in the past and go online. Seems to be a configuration that is changed. Any ideas?

Thanks
Rm
 

Similar Topics

N
Drive exec does not see smc softstart
Drive exec doesn't see my two smc soft starts. However rslinx classic does.. Thoughts?
Replies
2
Views
1,448
Nova5
N
A
SEW IPOS Drive Assembler Code conversion to PLC Ladder Logic
I have a machine which is undergoing upgradation. As part of the process two SEW drives are being replaced., existing Gen B with new Gen C. The...
Replies
2
Views
109
adnan_hayat88
A
I
Make an HMI convert from inches to PUUs (numeric input) before writing to servo drive
Hello all, I'm currently working on a servo motor linear positioning system (ball screw). I'm all set up regarding communication between my HMI...
Replies
1
Views
79
parky
P
B
can you run studio 5000 on an external drive? question on storage.
I have a few questions about Studio5000. 1. Why is my RA folder so big? its well over 100 GB. 2. How do you delete versions or extra files...
Replies
3
Views
260
robertmee
R
R
Homing in a servo drive s120
How is the homing of a servo drive done
Replies
5
Views
123
Steve Bailey
Steve Bailey
Back
Top Bottom