Powerflex 700 & rslogix 5000

Hello Sir,

After installing the AOP and doing the upload of the latest program, the drive was showing okay in Rslinx,The full download has been succesful.
The only challenge i had was that the project settings in rslogix 5000 and the drive settings was not matching so i connected to the drive directly and did a download and everything is fine, back to normal, i can control te drive speed from the panel view plus 1000.

Thanks, very very much

Please do you have any link to panelview plus 1000 tutorials, i want to create some tags, but i have never done it before

Good job for a first time!:site:

http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2711p-um006_-en-p.pdf

Thanks very much Sir, Best wishes

You're welcome!

Is there a way to do this without downloading the controller? knocking down a facility is not ideal to change out a VFD.