You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
 
Thread Tools Display Modes
Old November 9th, 2011, 08:14 AM   #1
agrosse
Member
United States

agrosse is offline
 
Join Date: Aug 2011
Location: Grand Haven
Posts: 24
PV 600 and L32E Daylight Savings Time Change

I am using a PanelView 600 and an L32E Processor. Recently the time has changed due to Daylight Savings Time. My PanelView is now an hour ahead. How would i go about getting this time to sync up with the new time? And also so it does this automatically at the next time change?
  Reply With Quote
Old November 9th, 2011, 09:59 AM   #2
Mickey
Lifetime Supporting Member
United States

Mickey is offline
 
Mickey's Avatar
 
Join Date: May 2003
Location: Palmdale,Ca
Posts: 10,043
Please provide the complete catalog number of your Panelview.
__________________
Mickey

If you want happiness for an hour-take a nap. If you want happiness for a day-go fishing. If you want happiness for a month-getmarried. If you want happiness for a year-inherit a fortune. If you want happiness for a lifetime-help someone else.
----- Chinese Proverb
  Reply With Quote
Old November 9th, 2011, 11:04 AM   #3
agrosse
Member
United States

agrosse is offline
 
Join Date: Aug 2011
Location: Grand Haven
Posts: 24
My appologies but its a PV+ 700. There are two CAT numbers on the PV, one says Assembled CAT#: 2711P-T7C4D6, and the other says Logic CAT#: 2711P-RP6.
  Reply With Quote
Old November 9th, 2011, 12:11 PM   #4
Mickey
Lifetime Supporting Member
United States

Mickey is offline
 
Mickey's Avatar
 
Join Date: May 2003
Location: Palmdale,Ca
Posts: 10,043
Quote:
Originally Posted by agrosse View Post
My appologies but its a PV+ 700. There are two CAT numbers on the PV, one says Assembled CAT#: 2711P-T7C4D6, and the other says Logic CAT#: 2711P-RP6.

Thanks, I am not familiar with Panelview Plus so no help here. I am sure those that are will be here shortly to help out.
__________________
Mickey

If you want happiness for an hour-take a nap. If you want happiness for a day-go fishing. If you want happiness for a month-getmarried. If you want happiness for a year-inherit a fortune. If you want happiness for a lifetime-help someone else.
----- Chinese Proverb
  Reply With Quote
Old November 9th, 2011, 12:11 PM   #5
Bob O
Member
United States

Bob O is offline
 
Join Date: May 2003
Location:
Posts: 1,507
Got to the Configuration screen and on it you should see a terminal setting button and from there you should be able to navigate to time and select the Day Light Saving enable/disabled.
To get to the Config screen reboot the PV+ and while rebooting look in the lower left hand corner for a white box...Press it when it displays and that will take you to the COnfig screen.
Note the little white box may not appear on some of the older units but I am too lazy to look right now.

HTH
  Reply With Quote
Old November 9th, 2011, 12:18 PM   #6
dcooper33
Lifetime Supporting Member + Moderator
United States

dcooper33 is online now
 
dcooper33's Avatar
 
Join Date: Jun 2011
Location: Rogers, AR
Posts: 694
I'm not sure about the automatic DST change, but I do know that you can easily change the time and date on PV+'s by going to terminal settings on the configuration screen.

Cheers,
Dustin
__________________
I'll walk a mile in your shoes. Now I'm a mile away, and I got your shoes.
  Reply With Quote
Old November 9th, 2011, 12:26 PM   #7
agrosse
Member
United States

agrosse is offline
 
Join Date: Aug 2011
Location: Grand Haven
Posts: 24
Much appreciated! Thanks!
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 09:15 PM.


.