roxtech
Member
Hi Dears,
we use mitsubishi plc Fx1N with one digital input extension module, one digital out put module and two Fx2n-8AD module for thermocouple k type. problem is when all thermocouple disconnect. we reads D1 190 to 220.
D2 to D8 have 320 to 400 value. while when we connect k type at ch#1 it show 438 to 442. My question is how much value we get at bef#10 which move to D1? Why value variation? we use code.
M8002 on {To k0 k0 h9999 k1}
{To k0 k1 h9999 k1}
(T0 k50)
T0 on {from k0 k10 d1 k8)
we use mitsubishi plc Fx1N with one digital input extension module, one digital out put module and two Fx2n-8AD module for thermocouple k type. problem is when all thermocouple disconnect. we reads D1 190 to 220.
D2 to D8 have 320 to 400 value. while when we connect k type at ch#1 it show 438 to 442. My question is how much value we get at bef#10 which move to D1? Why value variation? we use code.
M8002 on {To k0 k0 h9999 k1}
{To k0 k1 h9999 k1}
(T0 k50)
T0 on {from k0 k10 d1 k8)