Greg Dake
Member
Howdy everyone! I'm looking for an Eaton Cutler Hammer PLC output card. We have 3 machines which use these, we're upgrading to AB SLC's in 6-8 months, but in the meantime I need to locate a Cutler Hammer spare since we just used our last one. Here is the PLC card manufacturer part number:
D200MOD1200R It's a 24Vdc relay output card.
I checked www.plccenter.com, with no luck. Any ideas?
Toshiba actually makes the up-to-date replacements for these, and I've used a couple, but the problem is the terminal strips don't match and you need to re-wire the card.(it's a real pain on these machines). Hoping I can find some like-for-like CH's.
TIA,
Greg
D200MOD1200R It's a 24Vdc relay output card.
I checked www.plccenter.com, with no luck. Any ideas?
Toshiba actually makes the up-to-date replacements for these, and I've used a couple, but the problem is the terminal strips don't match and you need to re-wire the card.(it's a real pain on these machines). Hoping I can find some like-for-like CH's.
TIA,
Greg