Hi there, Does anyone know how a NPN sensor can be converted into a sourcing sensor? Can you describe in detailed lament terms how a PNP sensor can be converted to sinking. Are there any drawbacks to these techniques?
Anyone know what equations to write that could be programmed into a controller for the following conversions:
a) 4-20 mA to 0 to 100 gallons
b) 0-10V to 0 to 100 gallons
c) 4-20mA to 50 to 500 pounds
d) 4-20mA to 13 cfm to 26cfm (gas flow)
Anyone know what equations to write that could be programmed into a controller for the following conversions:
a) 4-20 mA to 0 to 100 gallons
b) 0-10V to 0 to 100 gallons
c) 4-20mA to 50 to 500 pounds
d) 4-20mA to 13 cfm to 26cfm (gas flow)