Hi
My boss has asked me to look into modernising some of our plant.
We have 6 cooling towers that on which we need to monitor the TDS and Bromine levels of the sump water, and when out of spec correct (In the TDS level by dumping some water and bringing in clean. The Bromine level by topping up the Bromine until the level is achieved)
I'm most comfortable with the mitsubishi FX1/2 series PLCs so would like to use them.
What controller would best suit my needs,and what expansion blocks would I need for the sensors( I will need 12 total ).Any recommendations on sensors would be great too.
Thanks
Mike
My boss has asked me to look into modernising some of our plant.
We have 6 cooling towers that on which we need to monitor the TDS and Bromine levels of the sump water, and when out of spec correct (In the TDS level by dumping some water and bringing in clean. The Bromine level by topping up the Bromine until the level is achieved)
I'm most comfortable with the mitsubishi FX1/2 series PLCs so would like to use them.
What controller would best suit my needs,and what expansion blocks would I need for the sensors( I will need 12 total ).Any recommendations on sensors would be great too.
Thanks
Mike