Beckhoff CX-8090 & Beijer HMI Console

I'm trying to read/write PLC tags from a Beijer HMI Console using Beckhoff ADS Ethernet protocol but it has proven a difficult task.

In the IX Developer i configure my PLC:
AMS Net ID: 5.23.174.178.1.1
IP: 192.168.0.175
Port 800.

The HMI console do not complain about connection errors or other things giving the impression that all is right, but when i change the digital inputs in my PLC the console dont detect the changes...

Has anyone managed to connect a T7A with a CX-8090? If yes, how???

Thanks for any help...

I usually connect it to BX.
But the AMS should be your IP adress + .1.1, which is 192.168.0.175.1.1

Problem solved... I have to add the HMI adress on PLC WindowsCE in C:\\System\TcAmsManager