Steve_D
Member
Can anyone point me to a site that will show me the connection diagram for an Omron AD101 module? Thanks
Omron AD101 wiring diagram
- Thread starter Steve_D
- Start date
gtsuport
Member
Can you provide the complete part number for the module?
There should be additional letters and numbers before the AD101. We would only be guessing without the rest of the information.
There should be additional letters and numbers before the AD101. We would only be guessing without the rest of the information.
Jay Anthony
Member
bluebyu is correct with the link he provided. There was only one analog module with the suffix 101.
Similar Topics
Hi all,
Currently having trouble getting a speed reference to write over modbus to an Omron M1...
I can successfully write a run command and...
Hi There,
I have couple of Omron PLCs connected on my kepserverex and my intouch reads data from kepserverex. I have been observing that roughly...
Hi dear . I have a system with cj1m cpu11 etn. previously NT 5z HMI was connected with plc. recently my old HMI got damaged. I want to replace it...
Omron AD081-V1 Analog Input Card
Offset & Gain Adjustment
Entering Adjustment Mode
1. Set the input card in adjustment mode (Turn ON Dip SW No-1)...
I am working on a project using a NB screen and NX1P2 PLC.
I am having a really hard time getting a real number to properly translate through to...
