Simatic S7 DLL error

Werner

Member
Join Date
Apr 2005
Location
IJsselstein
Posts
336
Hi!

When starting the Simatic manager I get the following error:

dllError.jpg


The problem started occuring after I updated my hardware

Install HW updates -> Download from internet -> Execute

Does anybody have an idea how to fix this? Beside this error I get two more dll errors. I don't think it will cause a problem because the part numbers metioned I don't use. But still it is annoying.

Thanks!
 

Similar Topics

Hello everyone! We have a computer running on Windows XP 32 bits SP3 where Simatic Net Softnet IE 2008 Lean is installed, with C++ (VC6.0 and...
Replies
1
Views
1,399
Dear sir, I am using SIMATIC 300, CPU 315-2DP , (6ES7 315-2AF03-0AB0) VIPA 603-1CC21 A1.0 RAM 32KB, Firmware=V4.0.8 The problem Im using MPI...
Replies
1
Views
63
Hi, I received this SIMATIC S7-300 training kit for maintenance. When I power it up, the PLC doesn't go to RUN mode and the STOP mode led is...
Replies
7
Views
252
I'm trying to build my Classic Step 7 programming skills this weekend. I get stuck on little things that are not covered in YouTube tutorials. I'm...
Replies
7
Views
248
I am utilizing both HMI and SCADA for my project. Both HMI and SCADA have identical tags. When I modify the tag value on HMI, it is reflected in...
Replies
2
Views
113
Back
Top Bottom